Turn signal inop

[Rider]

I decided to replace my right front turn signal on my 2003 650 Silverado since the turn signal got damaged. The signal worked properly before I put the new signal on. Now the left side flashers work just fine but when I turn the right flashers on, the rear flashes fast and the front just says on(not flashing). I changed out bulbs but that didn't help. Could the flasher relay be bad? Seems odd that it worked fine right before I replaced the flasher though.

I did blow a fuse when I first hooked it up because I switched a couple of the wires because the color coding of the new flasher was different from the OEM flasher. I fixed the wiring and replaced the fuse. I shouldn't have damaged the flasher relay since the fuse blew right?

[Particle Man]

When you mixed up the wiring you may have blown the relay before the fuse could take the hit.

[Rider]

When you mixed up the wiring you may have blown the relay before the fuse could take the hit.

Yeah there was a black wire and a black wire with a white stripe that I mixed up. The hot lead(red wire) was always on the correct wire. OEM colors were blue, dark green, and black with white stripe.

[Particle Man]

Yeah there was a black wire and a black wire with a white stripe that I mixed up. The hot lead(red wire) was always on the correct wire. OEM colors were blue, dark green, and black with white stripe.

My brother-in-law has an '03 Silverado and he did the same thing and it ended up being the relay. :)

[Rider]

My brother-in-law has an '03 Silverado and he did the same thing and it ended up being the relay. :)

That relay is $126. :tremble:

[Particle Man]

That relay is $126. :tremble:

Yikes

[karl_1052]

That relay is $126. :tremble:

Go to pep boys or wherever. It will most likely be a standard relay, with standard connections and a 'save our business' markup at a GM dealer.