PDA

View Full Version : See I fixed it

derf
08-23-2012, 09:51 PM
Not mine

http://i.imgur.com/Ojr9e.jpg
pauldun170
08-23-2012, 10:50 PM
:lol
Captain Morgan
08-24-2012, 01:38 AM
Sometimes you need to improvise so you can limp it till you get the part you need.
CasterTroy
08-24-2012, 08:43 AM
KLR rider fo sho!
azoomm
08-24-2012, 09:36 AM
Sometimes you need to improvise so you can limp it till you get the part you need.
Too bad it wasn't just to get home...

/twitch
Gas Man
08-24-2012, 12:33 PM
Looks great. I've done some crazy shit like that before. Problem being I normally don't have vise grips in my tool roll.

We mounted a rear foot peg on the forward controls of Razor's bike in Georgia two years ago. That was pretty good.
askmrjesus
08-24-2012, 04:23 PM
Sometimes you need to improvise so you can limp it till you get the part you need.

Yep...

Did the same thing (other end) for a buddy's bike a couple of weeks ago. :lol:

Zip-ties, vice grips, electrical tape......and beer.

Ugly, but he didn't have to walk home.

JC
Gas Man
08-24-2012, 08:53 PM
Awesome!
Dave
08-26-2012, 02:10 AM
crazy
derf
08-26-2012, 09:48 AM
From yesterdays ride The Tenere apparently cant survive jumping, it bent the skid plate back and put a hole in the oil pan. After some JB weld and oil from some hunters he was able to ride it out though:


http://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/553937_10150992969097396_1211599538_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-ash3/s720x720/556548_10150992970987396_312113222_n.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/s720x720/315057_10150992969697396_676625842_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/417405_10150992970367396_92698453_n.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-snc7/s720x720/579920_10150992970167396_1529058890_n.jpg
Dave
08-26-2012, 10:34 AM
Junk
Gas Man
08-26-2012, 11:31 AM
I guess it's not so dual sport. :lol:
Porkchop
09-06-2012, 09:55 PM
From yesterdays ride The Tenere apparently cant survive jumping, it bent the skid plate back and put a hole in the oil pan. After some JB weld and oil from some hunters he was able to ride it out though:


Saw that in the thread you posted the other day.... looks like he needs a beefier skid plate.
derf
09-06-2012, 11:20 PM
it was the beefy Yamaha did plate, problem is that it doesn't bolt to the frame, it has small mounting tabs. those just f olded down, some of the other aftermarket ones bolt to the frame, but most of them are big and ugly