First thing to mod [Archive]

azoomm

02-02-2009, 06:17 PM

So, what was the first thing you changed [upgraded] on your bike? Why?

Me? Exaust :dthumb: I wanted more of a growl and the termi's did JUST that. Not to mention the Carbon Fiber made them less hot and easier to clean.

Cutty72

02-02-2009, 06:18 PM

Levers cause i wanted shorties and there wasn't a pipe out for the 1125 yet.

tommymac

02-02-2009, 06:20 PM

Steel braided brake lines. Cant realy find em for the futura though. they def woul dhelp when I am beating on it.

tom

JARVIS518

02-02-2009, 06:34 PM

turn signals, cuz it was affordable and i hated the stock ones

Gas Man

02-02-2009, 06:51 PM

exhaust hands down!

Cutty72

02-02-2009, 06:59 PM

exhaust hands down!

Are there any stock components still on the chop?

Dave

02-02-2009, 07:56 PM

my bike came with a pipe but IIRC i cut off the catalizer cone and installed pazzos on the same day

dReWpY

02-02-2009, 07:57 PM

1/6th turn HRC throttle kit :whistle:

JoshuaTree

02-02-2009, 08:31 PM

Installed an Autocom intercom/music setup. Also added and auxilliary brake light to the topcase (affectionately known as the Brake Light of Death -- just ask azoomm...) and R-GS handguard protectors to reduce wind on the gloves. When I commuted on the bike, I also had auxilliary convex rearview mirrors to make blindspot lurkers immediately visible. GPS and Fog/Driving lights are next...

Mr Lefty

02-02-2009, 08:33 PM

Adeptus_Minor

02-02-2009, 09:04 PM

On my Warrior...

...umm

I removed the unsightly factory warning sticker on my tank.

I think that's all I've done so far. :idk:

Archren

02-02-2009, 09:20 PM

On my Warrior...

...umm

I removed the unsightly factory warning sticker on my tank.

I think that's all I've done so far. :idk:

I removed the AMS sticker the dealership was kind enough to slap onto my front fender (without asking me first). :lol:

the chi

02-02-2009, 09:27 PM

Shortie pazzos, simply cuz I got a killer deal and figured "why not"?!

Dnyce

02-02-2009, 09:34 PM

k&n oil filter, oil change, air filter. anytime i get a used bike/car, thats the first thing i do.

OneSickPsycho

02-02-2009, 09:42 PM

Two bikes I did nothing to... One bike was sliders... the TLR will be cable clutch conversion and stainless brake lines...

Quick281

02-02-2009, 10:44 PM

Frame sliders!

Most of my first mods were preparing for the worst. :dthumb:

Ninjakel

02-02-2009, 11:28 PM

1st thing i did was chain & sprockets (520)

Then the PC3r and custom map

Then i did the double bubble Puig

then I did steel braided lines.

and it was downhill from there :lol:

Vortex triple,rizoma rearsets,shorty levers, powdercoating, custom paint,etc.

I bought the bike with a full M4, so that was out of the way already

lauralynne

02-02-2009, 11:47 PM

does dropping it in the driveway count? no? well, then, lowering it. I've since added braided lines.

JoJoYZF

02-03-2009, 12:10 AM

on my ZZR it was the double bubble screen... but bought that and my exhaust and new signals all at the same time

for the Honda... not sure yet... probably gonna be the exhaust... or HID lights... or both :lol:

Id go with the 03-06 600rr integrated tail like trips, it looks so clean on that bike.

My bike came with a yoshi, so first was the flushmounts for the front. Then came an integrated 600rr tail light, chopping the fender and sliders. Next is probably just tires since I plan on selling it once I have a real job.

Mr Lefty

02-03-2009, 12:57 AM

Id go with the 03-06 600rr integrated tail like trips, it looks so clean on that bike.

My bike came with a yoshi, so first was the flushmounts for the front. Then came an integrated 600rr tail light, chopping the fender and sliders. Next is probably just tires since I plan on selling it once I have a real job.

Yeah I'll be doing that too... but it won't be the first thing...

Adeptus_Minor

02-03-2009, 12:59 AM

I bought the bike with a full M4, so that was out of the way already

M4's make bikes happy.

Cass

02-03-2009, 12:59 AM

Brakes - stainless braided up front, rear rotor, fresh EBC HH pads all around, and fresh fluid. Why? Because the previous owner was a doofus and KILLED the brakes in 8k miles. Killed. Seriously.

marko138

02-03-2009, 09:07 AM

I bought mine used, it had an exhaust on it, had a double bubble screen, and came stock with steel braided lines...so there wasn't much for me to do.

Exhaust woulda been first. So I put on frame pucks and axle sliders. I'd now like to add Pazzo's and a few carbon fiber bits.

Gas Man

02-03-2009, 11:55 AM

Are there any stock components still on the chop?

Um... the frame... the handlebars, hand controls (not grips), tranny.... I think that's it... oh maybe brakes...

Cutty72

02-03-2009, 11:56 AM

Um... the frame... the handlebars, hand controls (not grips), tranny.... I think that's it... oh maybe brakes...

:lol: and I thought you had swapped out the handlebars and brakes already too.

JoJoYZF

02-03-2009, 11:59 AM

Yeah I'll be doing that too... but it won't be the first thing...

Fair enough.

Gas Man

02-03-2009, 12:09 PM

Nope... the front forks are mostly stock... just added bezle and such to them as well as new tripples and such...

TYEster

02-08-2009, 08:04 PM

I'd like my first mod to be pushing it off a cliff...

In all seriousness, getting the mechanical issues fixed, and breakin all my new gear in!(and then single-side exhaust, shorty levers, brembo brakes, merch wheels, and a whole lotta track time with Elite!) :dthumb:

azoomm

02-08-2009, 08:22 PM

Lucky3623

02-12-2009, 09:59 AM

Elim kit.. to remove that piece of CRAP space station hanging off the tail...

t-homo

02-12-2009, 10:05 AM

Mine was mostly modded when I got it. First thing I did were tires, HIDs, and oil all at once. Oh and chain and sprockets were right before that.

CrazyKell

02-12-2009, 10:59 AM

CrazyKell

02-12-2009, 11:03 AM

Here's the picture I was looking for:

http://i33.photobucket.com/albums/d60/XcrazykellX/bootail.jpg

smileyman

02-12-2009, 12:38 PM

That backside looks so good it should be in a different part of the forum!

I have been fortunate enough to have several new bikes in my life. The process is always the same. First things that go are the reflectors and manu warning stickers, then it is brake lines, pads, and gearing. Then the invariable and almost certain transformation towards track prep, Case covers/protectors, sliders. Tires are usually shagged by this point so the upgrade gets done. Then the rearsets are needed cause I have extra grip.

I don't get into clip ons or exhausts until I get bored with the above mods or really get serious about taking it on track looking for those last 2 tenths:idk:

MILK

02-12-2009, 01:32 PM

First was lowered a tiny bit and bar risers since I'm not 12 feet tall like some people! :lol: The first one I WANTED to do was exhaust. Then horn.. then heated grips.. then LED brake lights.. then and then

Porkchop

02-13-2009, 08:28 PM

Exhaust was first for me too!

I researched my pipe like crazy and decided on the Devil's. BEST decision I ever made and people notice them all the time. The sound is incredible!

http://i33.photobucket.com/albums/d60/XcrazykellX/DSC01960.jpg

OMG Kell, I am so envious. That is the bike that I really wanted. Most likely will be my second once i build up some experience and cash. If you ever want to upgrade.... :whistle:

But back on topic. My bike already came with a Yoshi pipe, jet kit, aftermarket levers and rearsets, double bubble windshield, and carbon fiber intake covers. Most likely my first mod will be SS braided lines or HID lights. Mainly because my brakes are fucked up..... and a headlight is out.

Mrs. Colleen

02-13-2009, 08:42 PM

My bike already had an aftermarket exhaust so that was something I did not have to do.

First thing I purchased was my Ohlins shock...but Mark would not let me put it on until I realized how awful the stock ride was. :lol:

By the time I got the Ohlins installed I already did my stars and my seat. :D

askmrjesus

02-21-2009, 11:43 AM

Replace the stock clutch slave cylinder with a Yoyodyne unit, because the stock Ducati slaves are machined by blind eight year-olds on crack.

JC

marko138

02-21-2009, 09:37 PM

Replace the stock clutch slave cylinder with a Yoyodyne unit, because the stock Ducati slaves are machined by blind eight year-olds on crack.

JC
Thats a rough combination.

HokieDNA01

02-21-2009, 09:42 PM

Replaced the WAY over sprung rear shock with a Penske sprung for my weight. Also installed Ohlins front fork internals, braided brake lines and frameslides. All have been VERY worth it. (best presents ever from my BF :) )

02-21-2009, 10:39 PM

sticky tires job #1.

zed

02-28-2009, 12:25 PM

the grips was the first thing I changed. then -1 front sprocket, frame sliders and spools.

Phenix_Rider

02-28-2009, 12:49 PM

Handlebars and Grip heaters. Then slowly grab rails, tires, brake pads. Just found a smoking deal on a PCIII that I really hadn't been looking for. Soon brake lines and suspension. Be interesting to see what goes on before the rally.

Digifox

02-28-2009, 01:00 PM

Uh, i guess i ditched the UGLY ass ¼ fairing the guy cut out from the stock.
and junked the ugly Block head lamp.

http://img.photobucket.com/albums/v432/digifox1165/My%20toys/Ninja/000_1458.jpg

Phenix_Rider

02-28-2009, 07:29 PM

Uh, i guess i ditched the UGLY ass ¼ fairing the guy cut out from the stock.
and junked the ugly Block head lamp.

http://img.photobucket.com/albums/v432/digifox1165/My%20toys/Ninja/000_1458.jpg

"No Disassemble!" "Number 5 is Alive!" That thing looks like it popped right out of Short Circuit or Batteries Not Included.

Gas Man

02-28-2009, 08:02 PM

Oh yeah Johnny #5 is ALIVE

Mr Lefty

02-28-2009, 08:09 PM

"No Disassemble!" "Number 5 is Alive!" That thing looks like it popped right out of Short Circuit or Batteries Not Included.

:lol:

askmrjesus

03-05-2009, 07:37 PM

Oh yeah Johnny #5 is ALIVE

I wonder if it fell in love with Digi's toaster oven?

JC

Amorok

03-13-2009, 03:24 PM

Well, when I bought mine it was a touring model so it already had a windscreen, sissy bay, floorboards, heel-toe shifter and bags. I had them throw on crash bars and a luggage rack at the dealership when I bought it. The first thing I put on it myself was a Mustang seat, and it was worth every penny. Since then I've lowered it two inches, put a throttle lock, a taillight flasher, a tank bib, highway pegs and a riser kit with a tach (had that one done for me.) And I've wired in a cigarette lighter.

Rider

03-13-2009, 03:30 PM

On the Kawi the first mod was to get rid of the rear mud flap. Second was get rid of the shitty stock mirrors and replaced them with Buell mirrors, Third mod was Exhaust/Power commander/air filter. And a few other mods ofter that...

On the Zuke, Got rid of the mud flap first, second was the Pazzo shorty levers and third was the tinted double bubble windscreen.

z06boy

03-13-2009, 04:03 PM

The first thing for me on a sportbike is always the rear fender SS Enterprise looking thing hanging off the back and I relocate the tag.

Then it's usually the exhaust...then turnsignals...a tankpad...smoked windscreen...