Two Wheel Fix
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

Two Wheel Fix (http://www.twowheelfix.com/index.php)
-   Mechanical or Tech (http://www.twowheelfix.com/forumdisplay.php?f=13)
-   -   Clean parts? (http://www.twowheelfix.com/showthread.php?t=7424)

Switch 04-14-2009 08:39 PM
Quote:
Originally Posted by NONE_too_SOFT (Post 197033)
whoa... wd40 is a bad idea around brake parts.
WD40 + Brake Fluid = fail

NONE_too_SOFT 04-14-2009 08:43 PM
xactly. thats just bad advice right thar.

Particle Man 04-17-2009 03:07 PM
Quote:
Originally Posted by bmblebee (Post 197017)
WD 40 will clean brake parts as well as anything else will
:panic:

bmblebee 04-17-2009 03:52 PM
I use wd 40 to clean brake parts, then I rinse with water and non-ionic surfactant solution before re-installing the parts. I don't mix wd 40 with brake fluid. I don't get brake fluid on any part of my bike after calipers are installed. Don't know what y'all are freaking about. You do rinse your parts after cleaning and before installing...right?

NONE_too_SOFT 04-17-2009 06:51 PM
if by rinse you mean piss all over them, yes.

Switch 04-21-2009 08:33 AM
Quote:
Originally Posted by bmblebee (Post 198788)
I use wd 40 to clean brake parts, then I rinse with water and non-ionic surfactant solution before re-installing the parts. I don't mix wd 40 with brake fluid. I don't get brake fluid on any part of my bike after calipers are installed. Don't know what y'all are freaking about. You do rinse your parts after cleaning and before installing...right?
Rinse with poop.


All times are GMT -4. The time now is 07:13 PM.
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.