Two Wheel Fix

Two Wheel Fix (http://www.twowheelfix.com/index.php)
-   For Sale (http://www.twowheelfix.com/forumdisplay.php?f=16)
-   -   Powdercoating... (http://www.twowheelfix.com/showthread.php?t=618)

OneSickPsycho 03-16-2008 10:23 AM
Powdercoating...
 
Who here does it?

I have some odds and ends stuff I'd like done... small parts...

vabarber2 03-16-2008 06:02 PM
Phone Book!!!!!!

OneSickPsycho 03-16-2008 10:16 PM
Quote:
Originally Posted by vabarber2 (Post 17681)
Phone Book!!!!!!
Would rather support a fellow forum member and bike enthusiast!!!

Mrs. Colleen 03-16-2008 10:33 PM
If/when my husband gets his calipers powercoated this is who he would go to...

http://www.thepowdercoater.com/

:beers:

Mudpuppy 03-16-2008 10:37 PM
i know some sources up here if you don't mind paying shipping..

Mr Lefty 03-17-2008 05:47 AM
wasn't there a :twf: member that did it... :idk:

05svr650 03-17-2008 07:07 AM
At my full time job we do powder coating.

What do you have that you need done?

I may be able to hook you up, if you'll pay shipping both ways.

OneSickPsycho 03-17-2008 07:12 AM
Quote:
Originally Posted by Mudpuppy (Post 17843)
i know some sources up here if you don't mind paying shipping..
I figured I'd have to pay shipping no matter what...

Quote:
Originally Posted by Ebbs15 (Post 17950)
wasn't there a :twf: member that did it... :idk:
Ghoul did it... and did good work... Then fell off the face of the earth...

Quote:
Originally Posted by 05svr650 (Post 17958)
At my full time job we do powder coating.

What do you have that you need done?

I may be able to hook you up, if you'll pay shipping both ways.
Right now I just want my levers, bar clamp, shift shaft arm for sure... Haven't fully decided if I want to piss around with my pegs, foot controls, and heal guards... and I'm really undecided about my engine covers (not sure if I really want to mess with tearing it down like that just yet...

Mule 03-17-2008 07:13 AM
i've got a guy down here that has done all of my parts. He does a great job and his prices are reasonable....

Quote:
Originally Posted by OneSickPsycho (Post 17962)
I figured I'd have to pay shipping no matter what...



Ghoul did it... and did good work... Then fell off the face of the earth...



Right now I just want my levers, bar clamp, shift shaft arm for sure... Haven't fully decided if I want to piss around with my pegs, foot controls, and heal guards... and I'm really undecided about my engine covers (not sure if I really want to mess with tearing it down like that just yet...
some of the engine casings, you'll literally have to drop the motor to be able to get to the fasteners...

I had my footpegs and heel guards powdercoated and they came out great

OneSickPsycho 03-17-2008 07:15 AM
Quote:
Originally Posted by Mule (Post 17963)
i've got a guy down here that has done all of my parts. He does a great job and his prices are reasonable....
That mikezx9r or whatever on FSB does it too... I talked pricing and it's very reasonable too...

Mr Lefty 03-17-2008 07:17 AM
Quote:
Originally Posted by OneSickPsycho (Post 17962)
Ghoul did it... and did good work... Then fell off the face of the earth...
ahh ok... check with Gasman... I think he had something done by Ghoul... he may have his number :idk:

OneSickPsycho 03-17-2008 07:17 AM
Quote:
Originally Posted by Ebbs15 (Post 17968)
ahh ok... check with Gasman... I think he had something done by Ghoul... he may have his number :idk:
Probably not... I remember GM talking about not being able to find him...

Mr Lefty 03-17-2008 07:21 AM
Quote:
Originally Posted by OneSickPsycho (Post 17969)
Probably not... I remember GM talking about not being able to find him...
ahh ok... damn that sucks.

Gas Man 03-18-2008 07:56 AM
Quote:
Originally Posted by OneSickPsycho (Post 17969)
Probably not... I remember GM talking about not being able to find him...
Yep... he fell off the radar... f it

I used www.exoticcoatings.com

They are romulus, mi about 15 mins from my house

OneSickPsycho 03-23-2008 06:41 PM
Ok... so the guy on my local board just quoted me at $40 for both hand levers, both foot levers, both pegs, both healguards, handlebar clamp, and my engine covers in two different colors.

Seems ridiculously cheap... I'm amped.

Mr Lefty 03-23-2008 07:07 PM
Quote:
Originally Posted by OneSickPsycho (Post 21882)
Ok... so the guy on my local board just quoted me at $40 for both hand levers, both foot levers, both pegs, both healguards, handlebar clamp, and my engine covers in two different colors.

Seems ridiculously cheap... I'm amped.
are you doing all the prep?

OneSickPsycho 03-23-2008 07:26 PM
Quote:
Originally Posted by Ebbs15 (Post 21889)
are you doing all the prep?
Wiping them off and that's it!

Mr Lefty 03-23-2008 07:33 PM
Quote:
Originally Posted by OneSickPsycho (Post 21896)
Wiping them off and that's it!
so is he sand blasting them? all for $40

OneSickPsycho 03-23-2008 07:42 PM
Quote:
Originally Posted by Ebbs15 (Post 21901)
so is he sand blasting them? all for $40
:yesnod:

marko138 03-23-2008 07:49 PM
Killer deal.

Mr Lefty 03-23-2008 07:59 PM
Quote:
Originally Posted by marko138 (Post 21916)
Killer deal.
:withstupid:damn... that's a bad ass fuck'n deal!

OneSickPsycho 03-23-2008 08:00 PM
Quote:
Originally Posted by marko138 (Post 21916)
Killer deal.
I'll let everyone know how it turns out... Might be a great source...

marko138 03-23-2008 08:00 PM
Quote:
Originally Posted by OneSickPsycho (Post 21936)
I'll let everyone know how it turns out... Might be a great source...
This is the truth.

Mr Lefty 03-23-2008 08:05 PM
Quote:
Originally Posted by OneSickPsycho (Post 21936)
I'll let everyone know how it turns out... Might be a great source...
shit even with shipping he might turn out to be a lot cheaper than anywhere else!

how large an item can he do? could he do my frame

OneSickPsycho 03-23-2008 08:06 PM
Quote:
Originally Posted by Ebbs15 (Post 21948)
shit even with shipping he might turn out to be a lot cheaper than anywhere else!

how large an item can he do? could he do my frame
No, he can't go that big... He said 17" wheels are about max...

Mr Lefty 03-23-2008 08:09 PM
Quote:
Originally Posted by OneSickPsycho (Post 21951)
No, he can't go that big... He said 17" wheels are about max...
I kinda figured... a friend in AK could do small stuff he just bought an extra kitchen oven and put it in his garage... I imagine that's what your guy is using... good shit!

OneSickPsycho 03-23-2008 08:13 PM
Quote:
Originally Posted by Ebbs15 (Post 21959)
I kinda figured... a friend in AK could do small stuff he just bought an extra kitchen oven and put it in his garage... I imagine that's what your guy is using... good shit!
That's exactly it...

I'll tell you... Next place I live... will have a 2 car garage with an additional oven out there so I can get into this... From what I've been reading, it's mad retard easy to do!

Mr Lefty 03-23-2008 08:17 PM
Quote:
Originally Posted by OneSickPsycho (Post 21963)
That's exactly it...

I'll tell you... Next place I live... will have a 2 car garage with an additional oven out there so I can get into this... From what I've been reading, it's mad retard easy to do!
and you can make some nice track day $$$ doing it! he powdercoated EVERYTHING.. he'd do a set of wheels for like $50... and it'd cost him less than $5 for the stuff... he'd pocket a good 200 a month... EASY... that's less than a weekend of work

Cutty72 03-24-2008 12:52 AM
sweet deal, get him the shit quick before he sobers up and realizes he can make more!

Gas Man 03-24-2008 01:46 PM
That is a smokin deal... you are basically stealing the powder for that price!!!

Trip 03-24-2008 02:10 PM
Quote:
Originally Posted by OneSickPsycho (Post 21963)
That's exactly it...

I'll tell you... Next place I live... will have a 2 car garage with an additional oven out there so I can get into this... From what I've been reading, it's mad retard easy to do!
It is, someone in my office can do really tiny stuff in a toaster oven... It's so simple a caveman could do it.

marko138 03-24-2008 02:18 PM
Cavemen get upset by those kind of statements.

Trip 03-24-2008 02:19 PM
Quote:
Originally Posted by marko138 (Post 22335)
Cavemen get upset by those kind of statements.
fuck em, their television show was awful.

marko138 03-24-2008 02:20 PM
Yeah...it was really really bad.


All times are GMT -4. The time now is 11:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.