Two Wheel Fix

Two Wheel Fix (http://www.twowheelfix.com/index.php)
-   Aftermarket Modding (http://www.twowheelfix.com/forumdisplay.php?f=14)
-   -   Adjusting the Headlight (http://www.twowheelfix.com/showthread.php?t=1786)

Vettezilla (Impala Balko) 06-22-2008 03:55 PM

Adjusting the Headlight
 
I have a K1 gsxr 750 and i recently added a 8,000 K H.I.D. headlight conversion to it. now whenever I end up behind a car i see them instantly go to adjust their rearview mirror then they pull over so i can go around them... is there a way to adjust the light so its aiming a little bit lower so i am not blinding everyone i come across.
__________________

t-homo 06-22-2008 06:09 PM

Did you get the right kind of bulb? Normally they are designed with that in mind.

Vettezilla (Impala Balko) 06-22-2008 06:58 PM

Quote:

Originally Posted by t-rock (Post 52098)
Did you get the right kind of bulb? Normally they are designed with that in mind.

sure did... they are fine to me when i am riding its just that it seems like it is blinding everyone else.

No Worries 06-22-2008 10:44 PM

If I could get cars to pull over for me, I'd get an HID. But if the HID bulb is in the stock holder, it should have adjustment for up/down and side/side.

Dnyce 07-06-2008 04:07 PM

honestly-fuck em.

every new car has bright ass lights, my car's not tinted, and im blinded everytime im on a two lane road or if those fuckers get behind me.

so fuck em

hid ftw

NONE_too_SOFT 07-06-2008 04:10 PM

i agree w/ d. fuck em.

Vettezilla (Impala Balko) 07-07-2008 07:57 AM

THere is no adjusters on the headlight assymbly however I found that the front fairing wasnt adjusted properly and once i did adjust the fairing it lowered the beam 1/4 inch when the bike was 4 feet from a wall which sounds substantial.

WARputer 07-07-2008 10:49 AM

Check & see if there are 2 bronze colored phillips head screws to the right of the assembly....one will be for up/down & the other right/left. I had to adjust mine too, after the HID install.

Vettezilla (Impala Balko) 07-07-2008 11:44 AM

Quote:

Originally Posted by WARputer (Post 54115)
Check & see if there are 2 bronze colored phillips head screws to the right of the assembly....one will be for up/down & the other right/left. I had to adjust mine too, after the HID install.

I tried to adjust them with the two screws but none of them seem to do anything.

ceo012384 07-08-2008 05:33 PM

Quote:

Originally Posted by Vettezilla (Impala Balko) (Post 54127)
I tried to adjust them with the two screws but none of them seem to do anything.

How do you know they're not doing anything? The change in angle required is usually pretty small since it's project long distances down the road...

On mine there's a similar setup... the reflector sort of 'floats in the housing on these two threaded rods and you can turn them to tweak the orientation.

Did you try it in the garage with the lights shining on a wall, I assume?


All times are GMT -4. The time now is 04:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.