![]() |
Keihin CVK needles
Ugh, i have to ask since i cant find anything.
Is it possible to buy Keihin CVK needles? i need new ones since mine are all pitted and scarred up(I DIDNT DO IT) But running around on Google and EBay for about an hour all i can find with CVK needles are the Jet kits(and ALL i need are the jets) So is there any where im not looking that has them? Stock or Dynojet replacements. Ive found all kind of needles but they aren't for CV carbs (Round or flat slide carbs) |
Quick google search gives me this:
http://www.cyclewareables.com/pages/...ening_page.htm Dunno if that helps any. Edited to add: http://www.carbparts.com/keihin/need...et_needles.htm |
At first I thought this was Drug related.
But Now I realized It's Not...Lol |
have you looked on ronayers, bikebandit, cheapcycleparts, and/or oldbikebarn?
|
Seach "OEM PARTS then the make of the bike ie Kawi, suzuki, honda and so on. Also if you have a dyno jet kit you buy the kit or call dyno jet. They have sent me different needles for a Califoria bike for free.
|
went through all of google shopping,Ebay,Bikebandit,Factorypro,Dynojet and just a google search for sites.
Quote:
It HAD DynoJet Mains but everything else was stock (the slides wernt even drilled to 7/64th) ive changed over to the Keithin jets. and doing all the stuff myself http://faq.ninja250.org/wiki/Can_I_i...ole_jet_kit%3F If there is no need why buy a Jet kit for $78 that only cost about $20 in parts(6 jets at 2sum a piece). . . just takes a little longer to get your jetting right |
How many CVK needles do you need? I've got 1 rack of parts carbs at this point I'm willing to part with the needles from.
|
Cause the kits don't just have 4 mains. The last kit I bought had about 6 sets of 4 mains (24 mains) four needles and clips plus the four more they sent me (8 needles) four springs for the slides. Plus instructions.
Also the last kit I got for a single cylinder engine was only $36. Well worth the R&D they do. |
|
HRCNICK11: their website doesn't like my computer. . . .or their PDF is screwy
Quote:
|
All times are GMT -4. The time now is 03:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.