And here are the tools I used to complete the job.
Feeler gauge
spark plug wrench/socket
Caliper
Rubber mallet
small flat tip screwdriver
large flat tip screwdriver
T30 driver
T40 driver
4mm allen
5mm allen
6mm allen
8mm allen
4mm allen L shape
snap ring pliers
side cutter
8mm wrench
10mm wrench
13mm wrench
14mm wrench
magnet tool
needle nose pliers
channel lock pliers
ratchet w/ extension
8mm socket
17mm socket
mity vac (or your favorite way to bleed brakes/clutch)
turkey baster
Dot 4 brake fluid
Shim kit (10mm o.d.)
Coolant (optional)
rags
Oil and filter
And the most important
The manual.