Two Wheel Fix - View Single Post

Rangerscott · 07-19-2010, 01:08 AM

Got her done.

Loosened the stock cooler and let it hang.

I was hoping I wouldn't but I had to drain the oil. I tried using an 8mm wrench, but the bolt started stripping. Had to get a socket on them.

Once the oil drains, then you can unbolt the oil lines from the engine.

Left side.

Right side.

Luckily the O-rings look brand new. Not even smashed.

Might as well wash the lines. Just tiny spot rust here and there. Maybe I'll order new ones or have them powder coated.

07-19-2010, 01:08 AM	#6
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Got her done. Loosened the stock cooler and let it hang. I was hoping I wouldn't but I had to drain the oil. I tried using an 8mm wrench, but the bolt started stripping. Had to get a socket on them. Once the oil drains, then you can unbolt the oil lines from the engine. Left side. Right side. Luckily the O-rings look brand new. Not even smashed. Might as well wash the lines. Just tiny spot rust here and there. Maybe I'll order new ones or have them powder coated.