Two Wheel Fix - View Single Post - What's on Gas Man's Lift [kills even your high speed internet]

Gas Man · 03-27-2008, 01:37 AM

BLING

BLANG

Chopper setup...

Tight fit

The chop (pre-Phoenix project)

Also mounted a nice vice on the lift... very usefull.

Puts me at about $1600 into the lift. But damn it works so well!!!!

here we go again... this time my neighbor, aka Sgt, with his and mine limited amount of compatitable free time... my neighbors 04 Honda Shadow Sabre 1100 spent about 5 days on the lift....

I don't mind and I don't charge. I figure if the owner works on it with me its no charge. You want to drop off and pick up when done... I need at least food and drink.

Anyway... here we go...

Bust out the new V&H 2:1 pipes

The old stock system

Bolt that up. Start it up to check it out
http://s99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Sean/?action=view&current=Sean011.flv

then bolt up some new floor boards instead of the pegs

Cleaned her up a bit

03-27-2008, 01:37 AM	#3
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	BLING BLANG Chopper setup... Tight fit The chop (pre-Phoenix project) Also mounted a nice vice on the lift... very usefull. Puts me at about $1600 into the lift. But damn it works so well!!!! here we go again... this time my neighbor, aka Sgt, with his and mine limited amount of compatitable free time... my neighbors 04 Honda Shadow Sabre 1100 spent about 5 days on the lift.... I don't mind and I don't charge. I figure if the owner works on it with me its no charge. You want to drop off and pick up when done... I need at least food and drink. Anyway... here we go... Bust out the new V&H 2:1 pipes The old stock system Bolt that up. Start it up to check it out http://s99.photobucket.com/albums/l311/cjclark69/Lift%20Wrenching/Sean/?action=view&current=Sean011.flv then bolt up some new floor boards instead of the pegs Cleaned her up a bit Last edited by Gas Man; 09-23-2008 at 11:29 PM..