ProAligner

Gas Man · 10-10-2010, 01:16 AM

Quote:

Misaligned wheels can cause skewed braking, oversteer or understeer, drifting or pulling in one direction, and steering head shake. There are many wheels/tires alignment methods, from cords to straight edges to lasers and everything between. This one promises to be faster and more accurate.

ProAligner was created by a former Moto GP racer, tested by his fellow racers. It is as simple to use by a motorcycle owner as it is by a professional shop owner. ProAligner comes in a protective sleeve to keep it clean and safe in your tool box with detailed instructions printed on the back of the storage sleeve, so they never get lost. Only $29.95 + shipping. For an explanation of how it works go to ProAligner (you can download the instructions before you buy)

Not a bad idea. I don't need it with my self adjusting ultra rear axle but it might be good for the sporty and other bikes thru my garage.

What do you guys think?

Particle Man · 10-10-2010, 04:01 AM

Not a bad idea... I usually measure from swing-arm pivot to axle bolt center but I've often wondered about accuracy.

Phenix_Rider · 10-10-2010, 07:39 AM

It's a ruler...

I can get one for a dollar, not thirty dollars.

Gas Man · 10-11-2010, 09:14 PM

Quote:

Originally Posted by Particle Man

Not a bad idea... I usually measure from swing-arm pivot to axle bolt center but I've often wondered about accuracy.

Me too!

Quote:

Originally Posted by Phenix_Rider

It's a ruler...

I can get one for a dollar, not thirty dollars.

I hear ya but it's got a nifty hold up dilly.

wildchild · 10-13-2010, 02:02 PM

it's cheap enough and interesting. might be worth a try.

Gas Man · 10-14-2010, 09:00 AM

Quote:

Originally Posted by wildchild

it's cheap enough and interesting. might be worth a try.

That's what I was thinking.

Rangerscott · 10-17-2010, 05:21 PM

Since ya'll are more ejakated than me. Will this work on my bike?

I'm just so confused. I mean. It should help me. I feel as if my rear is tilted cause there is so much you have to move and bolt down to get the wheel straight.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-10-2010, 04:01 AM	#2
Particle Man Custom User Title Join Date: Nov 2008 Location: Central NY Moto: 2003 SV650S Posts: 14,959	Not a bad idea... I usually measure from swing-arm pivot to axle bolt center but I've often wondered about accuracy.

10-13-2010, 02:02 PM	#5
wildchild cruiser Join Date: Nov 2008 Location: on the run Moto: '09 HD superglide, 16 Yamaha FZ 09 Posts: 2,749	it's cheap enough and interesting. might be worth a try.

10-17-2010, 05:21 PM	#7
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Since ya'll are more ejakated than me. Will this work on my bike? I'm just so confused. I mean. It should help me. I feel as if my rear is tilted cause there is so much you have to move and bolt down to get the wheel straight.