![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#1 |
SFL Expatriate #1
Join Date: Nov 2008
Location: ATL Burbs
Moto: '09 Triumph Speed Triple
Posts: 4,712
|
![]()
OK, I've always used tubes with Schraeder valves up until a couple of years ago, when I put new tires on my MTB; decided to give Prestas a try. Yes, I used grommets on the rims in the stem holes. I've now had my 4th leaky valve stem since using Presta valves. The first two I could have accepted as being my fault, since I could have possibly not mounted the tube perfectly on the rim. But the last two were put on by a bike shop. Sunday morning we drove to a local green way and were going to take a ride, then I found my rear tube was leaking.
I'm going back to Schraeder. Has anyone else had issues with Presta? |
![]() |
![]() |
![]() |
#2 |
Elitist
Join Date: Nov 2008
Location: SF Bay Area
Moto: Gix 750
Posts: 11,351
|
![]()
Which ones are which? You talking about the ancient ones, like what cars use, or the newer ones with a skinny little thing in the middle?
|
![]() |
![]() |
![]() |
#3 |
SFL Expatriate #1
Join Date: Nov 2008
Location: ATL Burbs
Moto: '09 Triumph Speed Triple
Posts: 4,712
|
![]()
If you don't know the difference between the two, you obviously have nothing to add to this thread.
![]() |
![]() |
![]() |
![]() |
#4 |
Elitist
Join Date: Nov 2008
Location: SF Bay Area
Moto: Gix 750
Posts: 11,351
|
![]()
I know the difference between the two, seeing as how I have 2 bikes with both of them, but I forgot which name applies to which. But if you're going to force me to do a Google search instead of answering my question, so be it.
|
![]() |
![]() |
![]() |
#5 |
SFL Expatriate #1
Join Date: Nov 2008
Location: ATL Burbs
Moto: '09 Triumph Speed Triple
Posts: 4,712
|
![]()
Do you realize you could have Googled it and gotten the answer in much shorter time than it took you to reply?
![]() |
![]() |
![]() |
![]() |
#6 |
Elitist
Join Date: Nov 2008
Location: SF Bay Area
Moto: Gix 750
Posts: 11,351
|
![]()
Do you realize you could have answered my question in less time than you spent on your two pseudo-replies thus far?
|
![]() |
![]() |
![]() |
#7 |
................
Join Date: Nov 2008
Location: NC
Posts: 3,028
|
![]()
My neighbor has those Presta Valves on his MTB
He's ALWAYS complaining about them.....I can't see the benefit personally....but I'm not one to ride a umteen thousand dollar MTB. Irony is he's too cheap to buy the $40 pump to air them up himself...so when he has to air up, we have to swing by the bike shop before the trails ![]()
__________________
“Being tolerant does not mean that I share another one’s belief. But it does mean that I acknowledge another one’s right to believe, and obey, his own conscience.” Viktor Frankl |
![]() |
![]() |
![]() |
#8 |
Elitist
Join Date: Nov 2008
Location: SF Bay Area
Moto: Gix 750
Posts: 11,351
|
![]()
So, just did a Google search, and yes, the Prestas are over-rated. They are too sensitive and don't seem to hold air as long. The only advantage is they seem easier to pump, because of less resistance I guess.
|
![]() |
![]() |
![]() |
#9 |
SFL Expatriate #1
Join Date: Nov 2008
Location: ATL Burbs
Moto: '09 Triumph Speed Triple
Posts: 4,712
|
![]() |
![]() |
![]() |
![]() |
#10 | ||
SFL Expatriate #1
Join Date: Nov 2008
Location: ATL Burbs
Moto: '09 Triumph Speed Triple
Posts: 4,712
|
![]() Quote:
Quote:
|
||
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|