Drummer

Cutty72 · 02-15-2009, 12:32 PM

Ok as you all know, I've been waiting for a good pipe to be designed and released for the 1125.

We also all know that Drummer makes some kick ass cans for the Buells.

WELL, the Drummer is finally here.

The look

The sound
http://www.youtube.com/watch?v=9UtU_V3boFw

The price
$979.95...

Now I'm definatly waiting on the Spec Ops.

Dave · 02-15-2009, 12:49 PM

im underwhelmed

Cutty72 · 02-15-2009, 12:52 PM

The sound is nice.
The look would be ok, if there were a chin fairing available.
The price is a bit high for a slip on.
I know it's a drummer.
I know it's adding 10+hp
I don't really care though. I just want more sound, good looks, and similar to stock performance.
I know Odie is working one up that will be done shortly. I'll wait to at least compare the two.

Dave · 02-15-2009, 01:01 PM

from the looks of it im assuming sound was their #1 goal and any power they made was incedental. and for that price id expect it to be titanium with 10+ welds

Tmall · 02-15-2009, 01:38 PM

I've wanted one for some time. But they're way overpriced second hand(third hand?). And I've heard of it taking up to a year for ppl to receive theirs..

Adeptus_Minor · 02-15-2009, 02:15 PM

The sound is pretty good, but as you said, way too much for a slip-on.

Dave · 02-15-2009, 02:52 PM

ouch, i just did some research on both companys. wish i knew people would pay full system prices for gutted stock mufflers a few years ago

Cutty72 · 02-15-2009, 03:59 PM

Quote:

Originally Posted by Dave

ouch, i just did some research on both companys. wish i knew people would pay full system prices for gutted stock mufflers a few years ago

The drummer for the 1125 isn't a gutted stocker, it's all new.
Pretty sure the Spec Ops will be as well.

Still... $$$

marko138 · 02-15-2009, 04:00 PM

Quote:

Originally Posted by Dave

from the looks of it im assuming sound was their #1 goal and any power they made was incedental. and for that price id expect it to be titanium with 10+ welds

You don't know Drummer.

Though the price is WAY too much...good thing for me I don't own and 1125 and I already own a Drummer. Win Win.

was92v · 02-15-2009, 08:08 PM

I think I would have to look into a stainless or aluminum Hi-Perf car muffler with dual inlet/outlets and build my own for a couple of hundred bucks. I would hate to pay a $1000 for an under the engine slip-on muffler.
Maybe it wouldn't work, but for that kind of money I would be under the bike with a tape measure and a Summit Racing catalog figuring it out.

02-15-2009, 12:49 PM	#2
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	im underwhelmed __________________ TWF Post whore #6

02-15-2009, 01:01 PM	#4
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	from the looks of it im assuming sound was their #1 goal and any power they made was incedental. and for that price id expect it to be titanium with 10+ welds __________________ TWF Post whore #6

02-15-2009, 02:15 PM	#6
Adeptus_Minor Hopster Join Date: Nov 2008 Location: Austin, TX Moto: 2009 Buell 1125R Posts: 4,743	The sound is pretty good, but as you said, way too much for a slip-on. __________________ “Well, obviously before; after was all gendarmes and dick stitches.”

02-15-2009, 02:52 PM	#7
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	ouch, i just did some research on both companys. wish i knew people would pay full system prices for gutted stock mufflers a few years ago __________________ TWF Post whore #6

02-15-2009, 01:38 PM	#5
Tmall Aspiring Rapper Join Date: Nov 2008 Location: Halifax, NS Moto: '12 CB1000R Posts: 3,569	I've wanted one for some time. But they're way overpriced second hand(third hand?). And I've heard of it taking up to a year for ppl to receive theirs..

02-15-2009, 08:08 PM	#10
was92v Nowhere Man Join Date: Nov 2008 Posts: 558	I think I would have to look into a stainless or aluminum Hi-Perf car muffler with dual inlet/outlets and build my own for a couple of hundred bucks. I would hate to pay a $1000 for an under the engine slip-on muffler. Maybe it wouldn't work, but for that kind of money I would be under the bike with a tape measure and a Summit Racing catalog figuring it out.