Go Back   Two Wheel Fix > General > Off Topic

Reply
 
Thread Tools Display Modes
Old 07-28-2017, 06:40 AM   #161
Papa_Complex
Nomadic Tribesman
 
Papa_Complex's Avatar
 
Join Date: Nov 2008
Location: Brampton, Canada
Moto: '09 ER-6n
Posts: 11,150
Default

Here's the final version. The scales on the shoulder are actually silver, with protective blue plastic on them for shipping purposes.

__________________
"Everything's better with pirates." - Lodge, "Dorkness Rising"

http://www.morallyambiguous.net/
Papa_Complex is offline   Reply With Quote
Old 08-07-2017, 10:47 AM   #162
wildchild
cruiser
 
wildchild's Avatar
 
Join Date: Nov 2008
Location: on the run
Moto: '09 HD superglide, 16 Yamaha FZ 09
Posts: 2,749
Default

final product looks great. have you sold any yet?
wildchild is offline   Reply With Quote
Old 08-07-2017, 07:43 PM   #163
Papa_Complex
Nomadic Tribesman
 
Papa_Complex's Avatar
 
Join Date: Nov 2008
Location: Brampton, Canada
Moto: '09 ER-6n
Posts: 11,150
Default

I've sold a couple of larger pieces and tons of jewellery. Most of the large pieces that I've done have been donated to web series though.

I'll hopefully have a shot of Sarah in her modified shirt some time this week and she's hoping to do a shoot with it soon.
__________________
"Everything's better with pirates." - Lodge, "Dorkness Rising"

http://www.morallyambiguous.net/

Last edited by Papa_Complex; 08-07-2017 at 07:46 PM..
Papa_Complex is offline   Reply With Quote
Old 08-08-2017, 06:10 AM   #164
Turbo Ghost
Movie Star
 
Turbo Ghost's Avatar
 
Join Date: Feb 2011
Location: Kingsport, TN.
Moto: KLR650
Posts: 682
Default

That looks fantastic!! Any idea if she'll be at DragonCon this year? If you were to sell that piece what price would you be looking at? My girlfriend and I will be at DC this year. I'll be Ghost Rider and she's doing a video game character I'm not familiar with so I can't tell you the name but, the costume is fantastic! You should post some videos of the resistance welder in action!
Turbo Ghost is offline   Reply With Quote
Old 08-08-2017, 09:21 AM   #165
Papa_Complex
Nomadic Tribesman
 
Papa_Complex's Avatar
 
Join Date: Nov 2008
Location: Brampton, Canada
Moto: '09 ER-6n
Posts: 11,150
Default

Both Sarah and Jen might be at Dragon Con, because they're associated with the upcoming web series "Chaldea" by Peter Adkison (former CEO of Wizards of the Coast), but I'm unsure of that. If so, then they would likely wear their Chaldea character costumes. Sarah lives in Indiana, so GenCon is an almost certainty.

A piece like that one would go for $300+ and at that I would be paying myself maybe $2-$3/Hr labour.

I've been thinking about a video of the resistance welder once I've got my space better set-up, and I've become more proficient with it. Right now my work area is a mess, but at least it's not a fire hazard I have a more advanced version, but this is a video of my supplier's older version gives an idea of how it works.

https://www.youtube.com/watch?v=BWQ6ifucFhY
__________________
"Everything's better with pirates." - Lodge, "Dorkness Rising"

http://www.morallyambiguous.net/
Papa_Complex is offline   Reply With Quote
Old 08-09-2017, 05:42 PM   #166
Turbo Ghost
Movie Star
 
Turbo Ghost's Avatar
 
Join Date: Feb 2011
Location: Kingsport, TN.
Moto: KLR650
Posts: 682
Default

It's hard to see but, I'm guessing there is a groove in the tips of the electrodes and when you push the ring in it keeps pressure on the joint and then welds. Is it always live or does the pressure of pushing the ring in activate the welder? Nice device!
You're definitely underselling yourself with your labor costs but, that's often the way it works out I suppose. I've done a lot of metal, wood, mechanical stuff for people over the years and always short myself.
Turbo Ghost is offline   Reply With Quote
Old 08-09-2017, 06:01 PM   #167
Papa_Complex
Nomadic Tribesman
 
Papa_Complex's Avatar
 
Join Date: Nov 2008
Location: Brampton, Canada
Moto: '09 ER-6n
Posts: 11,150
Default

This is the unit that I have. Both the original and my later unit have a foot switch to control the welding action. The old unit required manually tuning it, via variable resistors, to set the pulse power and duration. My newer unit has 30 digitally selectable levels of pulse, so getting repeatable welds is theoretically easiler. In truth there's a fair bit of art to the science.

The flat electrodes make it easier to get solid contact on my model than on the original. I just have to burnish them occasionally with a fine file or sandpaper, in order to maintain good contact and remove oxide.

One problem with pricing is that you're always being compared to what comes out of India and Pakistan, at cut rate prices. Ultimately if I can build the skills to make high quality custom stuff, that'll no longer be an issue
Attached Images
File Type: jpg KXTRLWELDERKIT.jpg (196.0 KB, 0 views)
__________________
"Everything's better with pirates." - Lodge, "Dorkness Rising"

http://www.morallyambiguous.net/
Papa_Complex is offline   Reply With Quote
Old 08-10-2017, 04:22 PM   #168
Turbo Ghost
Movie Star
 
Turbo Ghost's Avatar
 
Join Date: Feb 2011
Location: Kingsport, TN.
Moto: KLR650
Posts: 682
Default

Nice rig! The price isn't too bad either if you plan on scaling up production! I have no ide if this would work but, if it can, it might save you a lot of time! Could you load a rod with open rings and then turn the welder on its' side and hold the rod in front of it and use your pliers to grab the rings and push them against the electrodes one after the other down the rod and when done, load the second rings on the first and load the rod again and repeat with the new rings that are hanging of the first rings and so forth until you get a sheet of mail? Don't know if that made sense but, it did in my head.

Ooh, ooh! Have a rod with a groove lengthwise and insert a thin strip of metal so when you slide the first rings on, they will have the gap lined-up on the strip and then you scoot them down and off as you weld them! Clear as mud?
Turbo Ghost is offline   Reply With Quote
Old 08-10-2017, 04:52 PM   #169
Papa_Complex
Nomadic Tribesman
 
Papa_Complex's Avatar
 
Join Date: Nov 2008
Location: Brampton, Canada
Moto: '09 ER-6n
Posts: 11,150
Default

Quote:
Originally Posted by Turbo Ghost View Post
Nice rig! The price isn't too bad either if you plan on scaling up production! I have no ide if this would work but, if it can, it might save you a lot of time! Could you load a rod with open rings and then turn the welder on its' side and hold the rod in front of it and use your pliers to grab the rings and push them against the electrodes one after the other down the rod and when done, load the second rings on the first and load the rod again and repeat with the new rings that are hanging of the first rings and so forth until you get a sheet of mail? Don't know if that made sense but, it did in my head.

Ooh, ooh! Have a rod with a groove lengthwise and insert a thin strip of metal so when you slide the first rings on, they will have the gap lined-up on the strip and then you scoot them down and off as you weld them! Clear as mud?
I tried something like that and, in practice, it didn't really make thins any faster. If you have a rod and give it a little bounce, all of the cuts in the rings pretty much go right to the top. Given how fast I've gotten and finding and aligning rings prior to welding, the time saving was almost zero.

I take a pile of rings, split it in half, then open up half and close half. The closed half gets welded shut. I then make chains that are the length of the sheet I want to make, which are two rings, joined by one, joined by two, joined by one... I then weld those closed. When I have the chains, I then weld them into sheets. It takes several passes this way, but it's the fastest way that I've found.
__________________
"Everything's better with pirates." - Lodge, "Dorkness Rising"

http://www.morallyambiguous.net/
Papa_Complex is offline   Reply With Quote
Old 08-16-2017, 06:16 AM   #170
Turbo Ghost
Movie Star
 
Turbo Ghost's Avatar
 
Join Date: Feb 2011
Location: Kingsport, TN.
Moto: KLR650
Posts: 682
Default

This is where experience trumps theory! It usually does!
Turbo Ghost is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:20 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.